ABM Protocol
Search…
Flapper - Detailed Documentation
The ABM Protocol's Surplus Auction House

1. Introduction (Summary)

Summary: Flapper is a Surplus Auction. These auctions are used to auction off a fixed amount of the surplus dotBTC in the system for ABM. This surplus dotBTC will come from the Stability Fees that are accumulated from Vaults. In this auction type, bidders compete with increasing amounts of ABM. Once the auction has ended, the dotBTC auctioned off is sent to the winning bidder. The system then burns the ABM received from the winning bid.

2. Contract Details

Flapper (Glossary)

  • Flap - surplus auction (selling dotBTC for ABM) [contract]
  • wards [usr: address] - rely/deny/auth Auth Mechanisms [uint]
  • Bid - State of a specific Auction[Bid]
    • bid - quantity being offered for the lot (ABM) [uint]
    • lot - lot amount (dotBTC) [uint]
    • guy - high bidder [address]
    • tic - Bid expiry [uint48]
    • end - when the auction will finish [uint48]
  • bids (id: uint) - storage of all Bids by id [mapping]
  • vat - storage of the Vat's address [address]
  • ttl - bid lifetime / max bid duration (default: 3 hours) [uint48]
  • lot - lot amount (dotBTC) [uint]
  • beg - minimum bid increase (default: 5%) [uint]
  • tau - maximum auction duration (default: 2 days) [uint48]
  • kick - start an auction / put up a new dotBTC lot for auction [function]
  • tend - make a bid, thus increasing the bid size / submit an ABMbid (increasing bid) [function]
  • deal - claim a winning bid / settling a completed auction [function]
  • gem - ABM Token [address]
  • kicks - total auction count [uint]
  • live - cage flag [uint]
  • file - used by governance to set beg, ttl, and tau [function]
  • yank - is used during Global Settlement to move tend phase auctions to the End by retrieving the collateral and repaying dotBTC to the highest bidder. [function]
  • tick() - resets the end value if there has been 0 bids and the original end has passed.

Parameters Set By Governance

The ABM Governance voters determine the surplus limit. The surplus auction is triggered when the system has an amount of dotBTC above that set limit.
  • Parameters Set through file:
    • beg
    • ttl
    • tau
Note: ABM governance also determines the Vow.bump which sets the Bid.lot for each Flap auction and the Vow.hump which determines the surplus buffer.

Authorizations

auth - check whether an address can call this method [modifier function]
  • rely - allow an address to call auth'ed methods [function]
  • deny - disallow an address from calling auth'ed methods [function]

3. Key Mechanisms & Concepts

The mechanism begins with the ABM holders (ABM Governance Voters) of the system. ABM holders will specify the amount of surplus allowed in the system through the voting system. Once they come to an agreement on what it should be set to, surplus auctions are triggered when the system has a surplus of dotBTC above the amount decided during the vote. System surplus is determined in the Vow when the Vow has no system debt and has accumulated enough dotBTC to exceed the Surplus auction size (bump) plus the buffer (hump)
In order to determine whether the system has a net surplus, both the income and debt in the system must be reconciled. In short, any user can do this by sending the heal transaction to the system contract named the "Vow". Provided there is a net surplus in the system, the surplus auction will begin when any user sends the flap transaction to the Vow contract.
Once the auction has begun, a fixed amount (lot) of dotBTC is put up for sale. Bidders then complete for a fixed lot amount of dotBTC with increasing bid amounts of ABM . In other words, this means that bidders will keep placing ABM bid amounts in increments greater than the minimum bid increase amount that has been set (this is the beg in action).
The surplus auction officially ends when the bid duration ends (ttl) without another bid getting placed OR when auction duration (tau) has been reached. At auction end, the ABM received for the surplus dotBTC is then sent to be burnt thereby contracting the overall ABM supply.

4. Gotchas (Potential source of user error)

Keepers

In the context of running a keeper in order to perform bids within an auction, a primary failure mode could occur when a keeper specifies an unprofitable price for ABM .
  • This failure mode is due to the fact that there is nothing the system can do to stop a user from paying significantly more than the fair market value for the token in an auction (this goes for all auction types, flip, flop, and flap).
  • Keepers that are performing badly in a flap auction run the risk of overpaying ABM for the dotBTC as there is no upper limit to the bid size other than their ABM balance.

Bid Increments During an Auction

During tend, bid amounts will increase by a beg percentage with each new tend. The bidder must know the auction's id, specify the right amount of lot for the auction, bid at least beg % more than the last bid and must have a sufficient ABM balance.
One risk is "front-running" or malicious miners. In this scenario, an honest keeper's bid of [Past-bid + beg%] would get committed after the dishonest keeper's bid for the same, thereby preventing the honest keeper's bid from being accepted and forcing them to rebid with a higher price ((Past-bid + beg) + beg)). The dishonest keeper would need to pay higher gas fees to try to get a miner to put their transaction in first or collude with a miner to ensure their transaction is first. This could become especially important as the bid reaches the current market rate for ABM<>dotBTC.
Quick Example:
The beg could be set to 3%, meaning if the current bidder has placed a bid of 1 ABM , then the next bid must be at least 1.03 ABM. Overall, the purpose of the bid increment system is to incentivize early bidding and make the auction process move quickly.

Placing Bids Incorrectly

Bidders send ABM tokens from their addresses to the system/specific auction. If one bid is beat by another, the losing bid is refunded back to that bidder’s address. It’s important to note, however, that once a bid is submitted, there is no way to cancel it. The only possible way to have that bid returned is if it is outbid (or if the system goes into Global Settlement).

Illustration of the bidding flow:

  1. 1.
    Vow kick's a new Flap Auction.
  2. 2.
    Bidder 1 sends a bid (ABM ) that increases the bid above the initial 0 value set during the kick. Bidder 1's ABM balance is decreased and the Flap's balance is increased by the bid size. bid.guy is reset from the Vow address to Bidder 1's and bid.tic is reset to now + ttl.
  3. 3.
    Next, Bidder 2 makes a bid that increases Bidder 1's bid by at least beg. Bidder 2's ABM balance is decreased and Bidder 1's balance is increased by Bidder 1's bid. The difference between Bidder 2's and Bidder 1's bid is sent from Bidder 2 to the Flap.
  4. 4.
    Bidder 1 then makes a bid that increases Bidder 2's bid by at least beg. Bidder 1's ABM balance is decreased and Bidder 2's ABM balance is increased by Bidder 2's bid. The amount Bidder 1 increased the bid is then sent from Bidder 1 to the Flap.
  5. 5.
    Bidder 2, as well as all the other bidders participating within the auction, decide it is no longer worth it to continue to bid higher bids, so they stop making bids. Once the Bid.tic expires, Bidder 1 calls deal and the surplus dotBTC tokens are sent to the winning bidder's address (Bidder 1) in the Vat and the system then burns the ABM received from the winning bidder. gem.burn(address(this), bids[id].bid).

5. Failure Modes (Bounds on Operating Conditions & External Risk Factors)

2. Other Failure Modes

  • Resulting from when ABM is burned
    • There is the possibility where a situation arises where the ABM token makes the transaction revert (e.g. gets stopped or the Vow's permission to call burn() is revoked). In a case like this, deal can't succeed until someone fixes the issue with the ABM token. In the case of stoppage, this could include the deploying of a new ABM token. This new deployment could be completed by any individual using the MCD System but governance would need to add it to the system. Next, it would need to replace the old surplus and debt auctions with the new ones using the new ABM token. Lastly, it is crucial to enable the possibility to vote with the new version as well.
  • When there is massive surplus
    • This would result in many Flap auctions occurring as the surplus over bump + hump is always auctioned off in bump increments. However, auctions run concurrently, so this would "flood the keeper market" and possibly result in too few bids being placed on any auction. This could happen through keepers not bidding on multiple auctions at once, which would result in network congestion because all keepers are trying to bid on all of the auctions. This could also lead to possible keeper collusion (if the capital pool is large enough, they may be more willing to work together to split it evenly at the system's expense).
Last modified 9mo ago